xiao

Juvtmall  ( a company supply  PCB Prototyping ,  PCBA service  and sell kinds of  components, modules  and so on)  The SIM808 GPRS/GSM+GPS Shield V1.0 is based on the chip named SIM808, it communicates with Catduino Uno via pins (RX, TX) with GPS data and GPRS data. For the operate voltage could either at 3.3V or 5V, it can be totally compatible to the Arduino. It can be also used to making/answering call, sending/receiving SMS messages and local the position. By the way, SIM GPRS/GSM+GPS Shield V1.0 suppose an SIM card holder at the opposite side. http://juvtmall.com/sim808-btgsmgps-sheild_p0813.html

9. PCB design related skills   Juvtmall  ( a company supply  PCB Prototyping ,  PCBA service  and sell kinds of  components, modules  and so on)  PCB design setting technique The PCB design needs to be set different points  in different stages. In the layout phase, the device layout can be used in the large lattice point . For large devices such as IC and non-locating connectors, the lattice site of 50~100mil can be selected for layout, and the grid point of 25mil can be used for the distribution of passive devices such as resistance capacitance and inductance. The precision of the large lattice point is beneficial to the orderliness and beauty of components. PCB layout rules 1. In general , all components shall be decorated on the same side of the boards, only the top-level element too close, set some highly limited and calorific value small devices o n the bottom., such as SMD resistor, SMD capacitors, SMD IC, etc. 2....